In many pre-1970 St. Louis Park homes, low water pressure is caused by corroded galvanized steel pipes. Mineral deposits narrow the inside of the pipe over time, restricting water flow. Other causes include a partially closed shut-off valve, a failing pressure regulator, or municipal supply issues. We can diagnose the cause and recommend whether a spot repair or full repipe is the right fix.

Yes , St. Louis Park’s municipal water is classified as “very hard” at 15 grains per gallon (256 PPM). Without a softener, you’ll see scale buildup on fixtures, reduced appliance lifespan, and higher water heater energy costs. We install and service water softeners sized for SLP’s specific hardness level.

Insulate exposed pipes in basements, crawl spaces, and exterior walls. Keep cabinet doors open under sinks on exterior walls during extreme cold snaps. Let faucets drip slightly when temperatures drop below zero. For long-term protection, we install heat trace cable and upgraded insulation — especially important in older SLP homes with minimal insulation.

We recommend testing your sump pump at least once a year, ideally in early spring before the snowmelt season. Pour a bucket of water into the pit to confirm it activates and drains properly. If your sump pump is more than 7 years old or your neighborhood has a high water table, consider installing a battery backup system.

Recurring backups in older St. Louis Park homes are often caused by deteriorating cast-iron sewer lines, tree root intrusion, or accumulated grease and scale. A sewer camera inspection can pinpoint the exact problem. Depending on what we find, we may recommend hydro jetting to clear the line or trenchless sewer repair to fix structural damage.

No. Bedrock never charges an after-hours surcharge — the price is the same whether you call at noon on Tuesday or midnight on Saturday. Plumbing emergencies don’t follow a schedule, and neither do we.